Agilent7890B GC System
Gas chromatographIndustry-standard GC for high-precision separation of gases and hydrocarbons, configured for coupling with mass-selective detectors.
Typical applications
- Refinery and natural gas analysis
- Biodiesel free & total glycerin (ASTM D6584)
- Semi-volatile organics (EPA 8270D)
- Backflush workflows for higher throughput
- Oil & gas
- Environment & HSE
Agilent7820A GC System
Gas chromatographRobust GC for routine, high-volume analysis of liquid, gas and volatile solid samples.
Typical applications
- Permanent gases and light hydrocarbons
- Aromatic solvents
- Preservatives and additives
- Oil & gas
- Environment & HSE
Agilent7000C Triple Quadrupole GC/MS
Triple-quadrupole GC/MS/MSTandem mass spectrometry for ultra-trace quantification in complex matrices, using MRM to suppress chemical noise.
Typical applications
- Multi-residue pesticide screening
- Persistent organic pollutants and SVOCs
- Toxins and contaminants in difficult matrices
Agilent×25977A MSD
Single-quadrupole GC/MSGC/MS with a high-efficiency extractor ion source for confident identification and quantification at trace levels.
Typical applications
- Hydrocarbon fingerprinting of fuels and lubricants
- VOC and SVOC screening
- Residual solvents (USP <467>)
- Unknown identification
- Oil & gas
- Environment & HSE
Agilent5977E MSD
Single-quadrupole GC/MSGC/MS for separating, identifying and quantifying compounds in complex mixtures.
Typical applications
- Pollutants and VOCs in air, soil and water
- Raw-material purity
- Degradation products
- Oil & gas
- Environment & HSE
Agilent7697A Headspace Sampler
Headspace samplerAutomated headspace introduction that isolates volatile compounds from heavy matrices, protecting the column and improving repeatability.
Typical applications
- VOCs and BTEX in water
- Residual solvents
- Volatiles in oils and packaging
- Oil & gas
- Environment & HSE
Agilent6130 Quadrupole LC/MS
Single-quadrupole LC/MSLiquid chromatography with mass detection for polar and non-volatile compounds.
Typical applications
- Pesticides and herbicides in water and soil
- Additives and trace toxins
- Purity and degradation studies
Agilent6550 iFunnel Q-TOF LC/MS
High-resolution Q-TOF LC/MSUltra-high-sensitivity accurate-mass LC/MS with sub-ppm mass accuracy for non-target screening and structure elucidation.
Typical applications
- Non-target screening of contaminants
- Metabolite and biomarker identification
- Characterisation of large biomolecules
Agilent7100 Capillary Electrophoresis
Capillary electrophoresisSeparates charged molecules and ions by size and charge, complementing liquid chromatography.
Typical applications
- Inorganic and organic ions
- Small charged molecules
- Protein and nucleic-acid purity
- Environment & HSE
- Fertilizers
Agilent7700 Series ICP-MS
ICP mass spectrometerTrace and ultra-trace multi-element analysis down to parts-per-trillion.
Typical applications
- Heavy metals in water, soil and wastewater
- Cd, Pb, As in fertilizers
- Metals in crude oil and catalysts
- Elemental impurities
- Oil & gas
- Fertilizers
- Environment & HSE
AgilentASX-500 ICP-MS Autosampler
AutosamplerAutomated sample introduction for the ICP-MS, enabling high-throughput elemental batches.
Typical applications
- Large monitoring campaigns
- Unattended overnight runs
- Oil & gas
- Fertilizers
- Environment & HSE
Agilent4100 MP-AES
Microwave plasma AESMulti-element analysis with a nitrogen microwave plasma. Fast, robust and economical for major and minor elements.
Typical applications
- Wear metals and additives in lubricating oils
- Nutrients and micronutrients in fertilizers
- Ores and geological samples
- Oil & gas
- Fertilizers
- Environment & HSE
Analytik Jenamercur
Cold-vapour mercury analyserDedicated analyser for trace and ultra-trace mercury down to sub-ppt levels.
Typical applications
- Mercury in condensate and process liquids
- Drinking, ground and waste water
- Fertilizers, soils and rocks
- Oil & gas
- Fertilizers
- Environment & HSE
Analytik Jenamulti EA 5000
C/N/S/Cl elemental analyserCombustion analyser for total sulfur, nitrogen, chlorine and carbon in gases, LPG, liquids and solids.
Typical applications
- Sulfur and nitrogen in crude, gasoline and diesel
- Total chlorine in hydrocarbons
- Sulfur in LPG and pressurised gases
- Coal, polymers and heavy oils
Analytik Jenamulti N/C 3100
TOC / TNb analyserHigh-throughput total organic carbon and total bound nitrogen analysis in waters.
Typical applications
- Produced and process water
- Wastewater discharge monitoring
- Boiler and cooling water
- Oil & gas
- Fertilizers
- Environment & HSE
Elementarvario MICRO cube
CHNS micro-analyserSimultaneous C, H, N and S determination by high-temperature combustion from milligram samples.
Typical applications
- Nitrogen content of fertilizers
- Coke, catalysts and deposits
- Polymers and organic materials
AgilentCary 630 FTIR
FTIR spectrometerCompact FTIR with interchangeable sampling modules for liquids, powders and films, with little or no sample preparation.
Typical applications
- In-service oil condition monitoring
- Raw-material identity checks
- Polymer and contaminant identification
AgilentCary 60 UV-Vis
UV-Vis spectrophotometerFast-scanning UV-Vis covering 190-1100 nm for quantitative and kinetic measurements.
Typical applications
- Colorimetric water parameters
- Concentration and purity
- Reaction monitoring
- Fertilizers
- Environment & HSE
Mettler-ToledoTGA/DSC 1
Simultaneous TGA/DSCMeasures mass change and heat flow simultaneously while a sample is heated, cooled or held isothermally.
Typical applications
- Moisture, ash and filler content
- Thermal stability of products
- Catalyst and deposit decomposition
- Melting and crystallisation
BrukerD2 PHASER XRD
X-ray diffractometerBenchtop powder XRD for phase identification and crystal-structure analysis.
Typical applications
- Mineralogy of cuttings, cores and ores
- Scale and corrosion products
- Phase composition of fertilizers
JEOLJSM-7500F FE-SEM
Field-emission SEMUltra-high-resolution scanning electron microscope for imaging surfaces and structures at nanoscale.
Typical applications
- Corrosion and failure analysis
- Particle morphology and coatings
- Grain structure of metals and ceramics